As we get ready for the launch of Cosmic Comics on Tuesday 12th Feb 2013,
let's have some fun with rocket science...
has a fantastic experiment for you. You can make your own air
What you need:
- Rocket activity instructions and templates on the TES
- 2 litre plastic bottle
- 30cm hosepipe
- 2 x 25cm plastic tubing
- Glue or sticky-backed plastic
- Electrical tape or gaffer tape
Make sure the plastic pipe fits snugly over the hosepipe and
that the hosepipe fits snugly in the bottle.
You can find diagrams on the TES
Remember - don't fire your rocket at people or
Ask an adult for help cutting the hosepipe and plastic
Make the rocket:
- Roll a sheet of paper around one piece of plastic tubing and
secure the paper together with glue or sticky-backed plastic.
Make sure the paper is a good fit but can slide off
- Cut out the nose cone and fins from the template on the TES
- Fix the nose cone and fins to the rocket as shown in the
diagrams on the TES Resource.
Make the launcher:
- Make sure the design has no gaps except the bottom of the
rocket. Gaps will allow air to escape and reduce the power.
- Fit one end of the hosepipe into the bottle and secure with
- Fit the second piece of plastic tubing over the other end of
the hosepipe and secure with tape.
Launch your rocket!
- Fill the launcher with air by blowing into the bottle through
- Take the rocket off the first piece of plastic tubing.
- Fit the rocket over the plastic tubing on the rocket launcher
and slide down as far as possible.
- Hold the hose to point the rocket up in the air or at a
target. Stamp down hard on the bottle to launch your rocket.
It may be easier to get someone to hold the rocket for you to
launch. You can decorate your rocket with drawings or stickers, or
use coloured paper.
You can change parts of the rocket or launcher to see how it
affects the rocket's performance. Try changing the number, size, or
position of the fins. Or change the length of pipe or tube on the
launcher. What happens if you use a bigger bottle?
Your air-powered rocket is propelled upwards by a blast of air
from the bottle.
When you stamp on the bottle, you increase the pressure inside
the bottle. This forces the air along the hosepipe and plastic
tubing, into the rocket.
The air forces the rocket upwards.
For more activities, check out the CREST Star